VT-E BT
Wireless Plug & Play Turntable
Audiophile vertical Plug & Play turntable with wall-mount option!
A turntable set-up does not need to be as complicated as rocket-science. Our VT-E BT turntable proves that. This good sounding belt-driven deck offers 2 versions for left– and right-handed users. The fastest possible installation process is made possible, because it comes pre-adjusted out of the box. No further set-up is needed. Tracking force and anti-skating are carefully set for the included Ortofon OM 5E cartridge. The VT-E BT turntable can be positioned on a table or mounted on a wall.
For further ease of use, it comes with a phono pre-amplifier and BT transmitter. So you can easily connect your VT-E BT via BT to any BT speakers or headphones! You can use both BT and RCA output at the same time. VT-E BT is available in black, red or white high gloss colour.
In the box:
- VT-E BT with Ortofon OM 5E
- Power supply
- RCA Phono Cable
- Felt mat
- Adapter for 7“ singles
- Wall-mounting kit
- Allen key
Features
- Vertical standing or wall mount option included
- Choose “R” (right-handed) or “L” (left-handed) version
- Instant playback with super-easy setup
- BT output for wireless use
- Record clamp for secure record fixing
- Belt drive with silicone belt
- Low vibration synchronous motor & DC power supply
- 8,6” aluminium tonearm
- Ortofon OM5e cartridge, pre-mounted
- Pre-adjusted tracking force & anti-skating force
- Special mechanism for perfect tracking in vertical position
- High quality RCA interconnect included
- Colour options: high-gloss black, white or red
Recommended Products
FAQs
VT-E BT automatically connects to the receiver in your room that receives the strongest signal. If there are too many other BT devices (Smartphone, PC, etc) around it may result in connection problems. In that case please turn off all other BT devices that may affect the connection. If there are some devices which you can't turn off (e.g. your neighbours Smartphone) position the receiver as close to VT-E BT as possible.
Possible causes for stuttering music are: other conflicting BT devices or WiFi, which sends on the same frequency as BT (2.4GHz). Other possible causes are: the distance between sender and receiver is too big, or both devices are in no direct line (furniture or walls blocking direct sight).
The VT-E BT functions exclusively as a Bluetooth audio transmitter (A2DP source) in accordance with the standardized A2DP profile (Advanced Audio Distribution Profile). In this architecture, the roles are clearly defined: • The transmitter transmits only the encoded audio stream. • The receiver (e.g., Bluetooth speaker or receiver) is responsible for decoding, amplification, and volume control. The A2DP specification states that the receiver amplifies the audio signal according to its own volume setting. The associated control function AVRCP (Absolute Volume) also stipulates that the actual volume is managed by the receiver device. Therefore: • The VT-E BT has no access to the internal volume of the Bluetooth receiver. • The volume after reconnecting is determined exclusively by the receiver device’s firmware (e.g., last saved value or default value). If a receiver uses an unexpectedly high volume after reconnecting, this is usually due to the firmware implementation of the respective Bluetooth receiver, not the VT-E BT.