BT Box S2
Audiophile aptX BT audio receiver
Audiophile wireless streaming with ultimate output flexibility!
Smartphones and tablet computers offer the possibility to stream music without wires using BT protocol. BT Box S2 is the best solution to use these wireless sources in your own hifi system. Not only standard SBC codecs are supported, but also audiophile aptX with almost CD-quality can be received. Pairing of mobile devices with BT Box S2 is done fast and playback works reliably within a distance up to 10m with direct visibility. Up to 8 different sources like smartphones and tablets are memorized. Analogue and digital connection to amplifier or external D/A converter is provided for ultimate flexibility.
- Wireless music streaming with almost CD-quality
- BT 3.0
- Supports aptX & SBC codecs
- Easy to install and use
- Fast auto pairing (3 to 5 seconds)
- Up to 8 different BT sources are memorized
- Works within a range of approximately 10 meters
- RCA stereo analogue and optical Toslink output
- Outboard power supply included
- Antenna included
- Available in silver or black
|Effective working range||up to 10m (direct visibility)|
|Supported codecs||aptX, SBC|
|Frequency||2402 ~ 2480 MHz|
|Sensitivity||- 84 dBm|
|Maximum received signal at 0.1% BER||> = -10 dBm|
|Maximum level of inter modulation interference||> = -30 dBm|
|Spurious output level||-156 dBm/Hz|
|Audio Output Level (nominal)||2 Vrms|
|Frequency response||20 Hz – 20 kHz|
|SNR (Line out/optical)||> 84 dB|
|THD (Line out/optical)||0.15% (aptX)|
|Analog output||1 pair RCA/cinch|
|Digital output||1x optical (Toslink®)|
|Dimensions W x H x D with sockets||116 x 37 x 108 mm|
|Outboard power supply||5V/1A|
|Power consumption||5 V/200 Ma max|
Bluetooth establishes a point-to-point connection between two devices. It would only be possible to address more than one devices, if two or more Bluetooth units are installed in the receiving unit. Because it is useless to play two different songs from two different devices at the same time, Bluetooth Box S2 can only receive signals from one device at once. It is possible to play music one after another from different devices.
After first connection with a device, Bluetooth Box S2 remembers this device and can play music from it, if no other Bluetooth connection is activated. Bluetooth Box S2 connects automatically with the last connected device, if the device is getting into reception range. Bluetooth has to be activated on the device.